메뉴

엔지니어링 & CAD / 샘플 태스크

생성된 공개 샘플

도면을 보고 브래킷을 모델링하십시오.

도면에서 모델까지의 완전한 태스크입니다. 모든 파일은 하나의 매개변수 세트로 생성되었으며, 어떤 기업의 실제 부품도 아닙니다.

제출물 비교하기 도면 판독

태스크 폴더 다운로드

정답 출력 · 드래그하여 회전호박색: C4가 측정하는 보어
회색 음영과 어두운 모서리로 표현된 생성된 마운팅 브래킷: 구멍 4개와 슬롯 1개가 있는 베이스 플레이트, 그리고 호박색으로 표시된 보어 하나가 있는 수직 웹
드래그하여 회전 · + / −로 확대/축소 · 더블클릭하여 초기화
분야
기계 부품
태스크 유형
도면에서 솔리드 모델로
접근 방식
파일, 헤드리스 CAD 커널
납품물
STEP 솔리드 1개
검증기
결정론적 형상 검증: 게이트 3개, 검사 항목 10개
시간 제한
45분
데이터 분할
공개 샘플, 학습 세트나 평가 세트에는 절대 포함되지 않음

참조 도면

DUF-S-001, rev A.

3각법으로 그린 3개의 뷰로, 정답 모델과 같은 매개변수로 생성되었으므로 도면과 정답이 서로 어긋날 수 없습니다. 호박색은 검증기가 측정하는, 공차가 지정된 보어를 표시합니다.

참조 도면 DUF-S-001 rev A: L자형 마운팅 브래킷의 정면도, 평면도, 우측면도. 크기 120 × 80 × 84 mm, 90 × 36 패턴의 9 mm 관통 구멍 4개, 10 × 30 슬롯, 수직부의 18 mm H7 보어(호박색 표시)
생성된 도면 · 원본 크기로 열기(SVG, 21.6 KB)

실행 결과 보기

제출물을 비교하십시오.

기록된 검증기 결과입니다. 노란색은 실패한 검사 항목을 표시합니다. 보고서를 펼치면 모든 측정값을 볼 수 있습니다.

제출물 선택

제출물

output/bracket.step  ←  tests/gold/bracket.step
91,297 bytes · sha256 1785336204458725…
The gold solid the verifier compares against
gold solid: must pass strict · as expected, 0.87 s
output/bracket.step  ←  written by solution/solve.py (85,015 bytes, built in 0.61 s)
solution/solve.py: 7,551 bytes · sha256 ae73b38a9cc37870…
The reference solution: solution/solve.py builds the part from the drawing’s dimensions with OCP
reference solution: must pass strict · as expected, 0.91 s
output/bracket.step  ←  tests/probes/alt_rebuilt.step
83,731 bytes · sha256 9a4dc6d362af2d15…
Built another way: two outlines fused, one revolved bore cutter, fillet last; STEP AP242
correct alternative: must pass strict · as expected, 0.88 s
output/bracket.step  ←  tests/probes/alt_bore_18009.step
91,386 bytes · sha256 00e293e59fc76bb1…
The bore at Ø18.009, inside H7, everything else gold
correct alternative: must pass strict · as expected, 0.82 s
output/bracket.step  ←  tests/probes/alt_split_faces.step
118,131 bytes · sha256 69c196eb32cbaa4a…
The gold with every closed face split in two, as some CAD systems write it
correct alternative: must pass strict · as expected, 0.87 s
output/bracket.step  ←  tests/probes/empty.step
0 bytes · sha256 e3b0c44298fc1c14…
An empty bracket.step
reward hack: must score exactly 0 · as expected, 0.68 s
output/bracket.step  ←  a note, and no output/bracket.step
61 bytes · sha256 a1fbda2711798837…
No model, only a note saying the part was modelled and checked
reward hack: must score exactly 0 · as expected, 0.68 s
output/bracket.step  ←  tests/probes/scaled_copy.step
96,498 bytes · sha256 7a19df708266b18d…
The gold solid scaled by 1.02
plausible mistake: must fail strict, caught by C1 to C8 · as expected, 0.91 s
output/bracket.step  ←  tests/probes/bore_oversize.step
91,317 bytes · sha256 201c90aa78c85c88…
The bore 0.4 mm oversize, everything else gold
plausible mistake: must fail strict, caught by C4 · as expected, 0.82 s
output/bracket.step  ←  tests/probes/three_holes.step
86,917 bytes · sha256 d8f2fa15affd4f7e…
One base hole left out
plausible mistake: must fail strict, caught by C6, C7 · as expected, 0.88 s
output/bracket.step  ←  tests/probes/mirrored.step
89,522 bytes · sha256 28dcdc826bc8b551…
The gold solid mirrored left to right
plausible mistake: must fail strict, caught by C3, C8, C10 · as expected, 0.91 s
output/bracket.step  ←  tests/probes/spline_faces.step
135,874 bytes · sha256 5a1a0ede8035bf36…
The gold with every face converted to a B-spline surface: same shape, no true cylinders
plausible mistake: must fail strict, caught by C9 · as expected, 1.87 s

검증기 출력 · gold 엄격 기준 통과 · 보상 1 · 점수 1.00

모든 게이트와 검사 항목을 통과했습니다.

전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 91297 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

검증기 출력 · solve_py 엄격 기준 통과 · 보상 1 · 점수 1.00

모든 게이트와 검사 항목을 통과했습니다.

전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 85015 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 24 faces, volume 209265.5 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0090, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 12 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

검증기 출력 · alt_rebuilt 엄격 기준 통과 · 보상 1 · 점수 1.00

모든 게이트와 검사 항목을 통과했습니다.

전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 83731 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 24 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 12 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

검증기 출력 · alt_bore_18009 엄격 기준 통과 · 보상 1 · 점수 1.00

모든 게이트와 검사 항목을 통과했습니다.

전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 91386 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209265.5 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0090, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

검증기 출력 · alt_split_faces 엄격 기준 통과 · 보상 1 · 점수 1.00

모든 게이트와 검사 항목을 통과했습니다.

전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 118131 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 32 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 4 cone, 18 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass true
reward 1
score 1.00

검증기 출력 · empty 엄격 기준 실패 · 보상 0 · 점수 0.00

G1 FAIL output/bracket.step exists, is not empty and reads as STEP: the file is empty (0 bytes)
전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 FAIL output/bracket.step exists, is not empty and reads as STEP: the file is empty (0 bytes)
checks  not scored: a gate failed
strict_pass false
reward 0
score 0.00

검증기 출력 · claim_only 엄격 기준 실패 · 보상 0 · 점수 0.00

G1 FAIL output/bracket.step exists, is not empty and reads as STEP: no file at output/bracket.step
전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 FAIL output/bracket.step exists, is not empty and reads as STEP: no file at output/bracket.step
checks  not scored: a gate failed
strict_pass false
reward 0
score 0.00

검증기 출력 · scaled_copy 엄격 기준 실패 · 보상 0 · 점수 0.10

C1 FAIL Envelope: 122.400 × 81.600 × 85.680 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 FAIL Volume: 222.08 cm³ (+6.12%) expected 209.27 cm³ ±0.5% · w10
C3 FAIL Overlap with the gold (IoU): 0.8386 expected ≥ 0.995 · w10
C4 FAIL Bore diameter: Ø18.3600, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 FAIL Bore axis: position, square to B: X 61.200, Z 53.040; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 FAIL Through holes: count and diameter: 4 through, all Ø9.180 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 0 of 4 within 0.10, worst 2.100 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 FAIL Slot: width, length, centre: 10.200 × 30.600 at (42.840, 30.600) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 96498 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 222077.5 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 122.40 × 81.60 × 85.68 mm
C1 FAIL Envelope: 122.400 × 81.600 × 85.680 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 FAIL Volume: 222.08 cm³ (+6.12%) expected 209.27 cm³ ±0.5% · w10
C3 FAIL Overlap with the gold (IoU): 0.8386 expected ≥ 0.995 · w10
C4 FAIL Bore diameter: Ø18.3600, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 FAIL Bore axis: position, square to B: X 61.200, Z 53.040; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 FAIL Through holes: count and diameter: 4 through, all Ø9.180 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 0 of 4 within 0.10, worst 2.100 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 FAIL Slot: width, length, centre: 10.200 × 30.600 at (42.840, 30.600) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.84 < bore X 61.20: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.10

검증기 출력 · bore_oversize 엄격 기준 실패 · 보상 0 · 점수 0.80

C4 FAIL Bore diameter: Ø18.4000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 91317 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209130.1 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.13 cm³ (-0.07%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 0.9993 expected ≥ 0.995 · w10
C4 FAIL Bore diameter: Ø18.4000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.80

검증기 출력 · three_holes 엄격 기준 실패 · 보상 0 · 점수 0.80

C6 FAIL Through holes: count and diameter: 3 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 3 of 4 within 0.10, worst 0.000, 1 missing expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 86917 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 24 faces, volume 210032.0 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 210.03 cm³ (+0.36%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 0.9964 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 FAIL Through holes: count and diameter: 3 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 FAIL Hole pattern: centre positions: 3 of 4 within 0.10, worst 0.000, 1 missing expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 12 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.80

검증기 출력 · mirrored 엄격 기준 실패 · 보상 0 · 점수 0.75

C3 FAIL Overlap with the gold (IoU): 0.9686 expected ≥ 0.995 · w10
C8 FAIL Slot: width, length, centre: 10.000 × 30.000 at (78.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C10 FAIL Handedness: slot X 78.00 > bore X 60.00: right expected slot left of the bore, seen from the front · w5
전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 89522 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 FAIL Overlap with the gold (IoU): 0.9686 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 FAIL Slot: width, length, centre: 10.000 × 30.000 at (78.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 ok Feature types: all present · faces: 2 cone, 13 cylinder, 10 plane expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 FAIL Handedness: slot X 78.00 > bore X 60.00: right expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.75

검증기 출력 · spline_faces 엄격 기준 실패 · 보상 0 · 점수 0.95

C9 FAIL Feature types: missing: bore cylinder; 0/4 hole cylinders; R6 fillet ×0; R10 rounds ×0; 1×45° chamfers ×0 · faces: 25 B-spline expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
전체 검증기 출력
$ bash tests/test.sh output/bracket.step
G1 ok output/bracket.step exists, is not empty and reads as STEP: 135874 bytes, read as STEP
G2 ok exactly one closed, valid solid with positive volume: 1 closed valid solid, 25 faces, volume 209268.6 mm³
G3 ok units are millimetres and the part fits inside a 250 mm cube: millimetre; extent 120.00 × 80.00 × 84.00 mm
C1 ok Envelope: 120.000 × 80.000 × 84.000 expected 120.0 × 80.0 × 84.0 ±0.10 · w10
C2 ok Volume: 209.27 cm³ (+0.00%) expected 209.27 cm³ ±0.5% · w10
C3 ok Overlap with the gold (IoU): 1.0000 expected ≥ 0.995 · w10
C4 ok Bore diameter: Ø18.0000, 3 sections within 0.0000 expected Ø18 H7: 18.000 to 18.018 · w20
C5 ok Bore axis: position, square to B: X 60.000, Z 52.000; square 0.0000 expected X 60.00, Z 52.00 ±0.05; square ≤ 0.02 · w10
C6 ok Through holes: count and diameter: 4 through, all Ø9.000 expected 4 × Ø9.0 ±0.10, through · w10
C7 ok Hole pattern: centre positions: 4 of 4 within 0.10, worst 0.000 expected 90.0 × 36.0 from (15, 14), ±0.10 · w10
C8 ok Slot: width, length, centre: 10.000 × 30.000 at (42.000, 30.000) expected 10.0 × 30.0 at (42, 30) ±0.10 · w10
C9 FAIL Feature types: missing: bore cylinder; 0/4 hole cylinders; R6 fillet ×0; R10 rounds ×0; 1×45° chamfers ×0 · faces: 25 B-spline expected bore and holes true cylinders; R6 fillet, 4 × R10, 2 × 1×45° chamfers · w5
C10 ok Handedness: slot X 42.00 < bore X 60.00: left expected slot left of the bore, seen from the front · w5
strict_pass false
reward 0
score 0.95

2026년 11월 14일, 태스크 컨테이너에서 1회 실행. environment/Dockerfile로 빌드하고 네트워크를 끈 상태로 실행했습니다(Docker 29.1.3, Linux): Python 3.12.13, OCP 8.0.1.1을 통한 OpenCascade, numpy 2.5.4. 제출물 12개: 정답 솔리드, 참조 풀이의 출력, 프로브 10개(보상 해킹 2개, 그럴듯한 오류 5개, 올바른 대안 풀이 3개)이며, 각각 별도의 프로세스에서 채점했습니다: 개당 0.68~1.87초, 총 12.3초. 12개 중 12개가 예상대로였습니다. 검증기 sha256 ea5e7f60c430b8ea…

태스크 개요

에이전트가 받는 지시.

에이전트가 접근할 수 있는 파일 및 도구와 함께 제공되는 지시문입니다.

instruction.md818바이트

# Model the bracket on drawing DUF-S-001

`project/drawing.svg` is a released drawing (rev A) of a mounting bracket. Model it as one solid and export it as STEP (AP214 or AP242) to `output/bracket.step`.

- Work in millimetres. Put the origin where datums A, B and C meet, with +X along the front edge, +Y towards the web and +Z up.
- Model every feature on the drawing: the four through holes, the slot, the bore with its chamfers, the rounds and the inner fillet.
- Model the Ø18 H7 bore at a diameter inside its tolerance (18.000 to 18.018).
- The drawing governs. Where it is silent, ISO 2768-m applies.
- Python 3.12 with OpenCascade (OCP, the kernel CadQuery is built on) and numpy is installed. You have no network access.

When the file is written, say so in one line. Do not describe checks you did not run.
에이전트가 볼 수 있는 것
/workspace 안의 project/drawing.svg와 빈 output/ 폴더
도구
Dockerfile이 설치하는 셸, OpenCascade(OCP)와 numpy가 포함된 Python 3.12. 네트워크 없음
에이전트에게 숨겨진 것
실행이 끝난 후에만 복사되는 tests/ 안의 정답 솔리드, 프로브, 검사 항목, 그리고 solution/ 안의 참조 풀이
변형
생성기는 모든 치수, 구멍 패턴, 끼워맞춤을 매개변수로 받으므로, 하나의 유형에서 서로 다른 많은 태스크가 만들어집니다

납품물과 검증기

형상을 피처별로 채점합니다.

먼저 게이트를 거칩니다: 누락되었거나, 손상되었거나, 단위가 잘못된 답은 0점입니다. 그다음 가중치가 있는 10개의 검사 항목이 이어지며, 각각은 명시된 허용 오차를 갖는 측정입니다. 전체 형상 비교가 먼저입니다. 그다음 공차가 지정된 각 피처를 제출된 솔리드를 절단한 단면에서 개별적으로 측정하고, 그 면의 유형을 검사합니다.

파일
output/bracket.step, STEP AP214 또는 AP242, 정확히 하나의 솔리드
좌표계
밀리미터, 원점은 데이텀 A, B, C, Z축 위쪽. 검증기는 비교 전에 데이텀 면에 맞춰 정렬도 수행합니다
채점 대상 아님
피처 트리, 바디 이름, 색상, 레이어, 모델링 방법
보상
모든 게이트와 10개 검사 항목을 모두 통과하면(엄격 기준 통과) 1, 그렇지 않으면 0. 이것이 학습 보상입니다
점수
통과한 검사 항목의 가중치 합을 100으로 나눈 값. 게이트 중 하나라도 실패하면 0. 답이 어디서 잘못되었는지를 보여 줍니다

게이트

게이트충족 조건
G1output/bracket.step가 존재하고, 비어 있지 않으며, STEP으로 읽힘
G2부피가 양수인, 닫혀 있고 유효한 솔리드가 정확히 하나 있음
G3단위가 밀리미터이고, 부품이 250 mm 정육면체 안에 들어감

검사 항목

검사 항목측정 대상목표값허용 오차가중치
C1외곽 치수120.0 × 80.0 × 84.0 mm±0.10 mm10
C2부피209.27 cm³(정답)±0.5%10
C3A, B, C에 맞춰 정렬한 정답 솔리드와의 중첩도IoU(교집합 대 합집합 비율)0.995 이상10
C4보어 지름: 3개 단면에서 보어 벽에 원을 맞춰 측정Ø18 H718.000~18.018 mm20
C5보어 축: 위치 및 B에 대한 직각도X 60.00, Z 52.00±0.05 mm; 0.02 mm10
C6베이스의 관통 구멍: 개수와 지름4 × Ø9.0, 관통±0.10 mm10
C7구멍 패턴: 중심 위치90.0 × 36.0, 첫 번째 구멍 위치 (15, 14)±0.10 mm10
C8슬롯: 폭, 길이, 중심10.0 × 30.0, 중심 (42, 30)±0.10 mm10
C9존재하는 피처 유형보어와 구멍은 진원통, R6 내측 필릿, R10 라운드 4개, 1 × 45° 보어 모따기 2개면 유형 기준, 반지름은 ISO 2768-m 기준5
C10좌우 방향정면에서 볼 때 슬롯이 보어의 왼쪽에 있음정확히 일치5

도면과 모델에 호박색으로 표시된 C4는 전체 형상 비교로 대체할 수 없는 검사 항목입니다.

프로브

반드시 거부해야 할 오답, 반드시 통과시켜야 할 정답.

태스크를 출시하기 전에 참조 풀이의 출력, 의도적으로 틀리게 만든 답, 다른 방식으로 만든 올바른 대안 풀이에 대해 검증기를 실행합니다. 보상 해킹은 정확히 0점을 받아야 하고, 모든 그럴듯한 오류는 걸리도록 설계된 검사 항목에서 엄격 기준 실패해야 하며, 참조 풀이와 모든 올바른 대안 풀이는 통과해야 합니다. 아래의 각 행은 기록된 실행에서 가져온 것입니다.

모든 프로브 제출물과 측정값
제출물내용유형검증기 측정값탐지한 검사 항목점수엄격 기준
gold검증기가 비교 기준으로 삼는 정답 솔리드정답 솔리드외곽 0.10 이내; 부피 +0.00%; 중첩도 1.0000; 보어 Ø18.0000없음1.00통과
solve_py참조 풀이: solution/solve.py가 OCP를 사용해 도면의 치수로 부품을 만듭니다참조 풀이외곽 0.10 이내; 부피 +0.00%; 중첩도 1.0000; 보어 Ø18.0090없음1.00통과
alt_rebuilt다른 방식으로 만듦: 윤곽 두 개를 결합하고, 회전시킨 보어 절삭체 하나를 사용하고, 필릿은 마지막에 적용. STEP AP242올바른 대안 풀이외곽 0.10 이내; 부피 +0.00%; 중첩도 1.0000; 보어 Ø18.0000없음1.00통과
alt_bore_18009보어가 H7 범위 안인 Ø18.009이고, 나머지는 모두 정답과 동일올바른 대안 풀이외곽 0.10 이내; 부피 +0.00%; 중첩도 1.0000; 보어 Ø18.0090없음1.00통과
alt_split_faces일부 CAD 시스템이 기록하는 방식처럼, 닫힌 면을 모두 둘로 분할한 정답올바른 대안 풀이외곽 0.10 이내; 부피 +0.00%; 중첩도 1.0000; 보어 Ø18.0000없음1.00통과
empty빈 bracket.step보상 해킹파일이 비어 있음(0바이트)G10.00실패
claim_only모델 없이 부품을 모델링하고 검사했다는 메모만 있음보상 해킹output/bracket.step에 파일 없음G10.00실패
scaled_copy1.02배로 축척한 정답 솔리드그럴듯한 오류외곽 122.400 × 81.600 × 85.680; 부피 +6.12%; 중첩도 0.8386; 보어 Ø18.3600C1~C80.10실패
bore_oversize보어가 0.4 mm 크고, 나머지는 모두 정답과 동일그럴듯한 오류외곽 0.10 이내; 부피 -0.07%; 중첩도 0.9993; 보어 Ø18.4000C40.80실패
three_holes베이스 구멍 하나 누락그럴듯한 오류외곽 0.10 이내; 부피 +0.36%; 중첩도 0.9964; 보어 Ø18.0000; 관통 구멍 3개 관통, 모두 Ø9.000; 구멍 패턴 4개 중 3개 0.10 이내, 최대 편차 0.000, 1개 누락C6, C70.80실패
mirrored좌우로 반전한 정답 솔리드그럴듯한 오류외곽 0.10 이내; 부피 +0.00%; 중첩도 0.9686; 보어 Ø18.0000; 슬롯 10.000 × 30.000, 위치 (78.000, 30.000); 좌우 방향: 슬롯 X 78.00 > 보어 X 60.00: 오른쪽C3, C8, C100.75실패
spline_faces모든 면을 B-spline 곡면으로 변환한 정답: 형상은 같지만 진원통이 없음그럴듯한 오류외곽 0.10 이내; 부피 +0.00%; 중첩도 1.0000; 보어 Ø18.0000; 진원통, 원뿔, 평면 없음C90.95실패

다음 절의 실행인 tests/run_results.json에서 생성되었습니다. 크게 만든 보어는 외곽 치수, 부피, 중첩도를 모두 통과하며, 저희 자체 형상 연구에서와 마찬가지로 보어를 측정할 때만 잡힙니다. B-spline 사본은 형상은 맞지만 피처 유형에서만 실패합니다: CAM 시스템이나 검사원은 그 안에서 구멍으로 인식할 진원통을 찾지 못합니다.

tests/verify.py · C4와 C5가 보어를 측정하는 방식
def measure_bore(solid):
    """The Ø18 H7 bore. Cut the web square to the bore at three depths, clear of the
    1 mm chamfers; fit a circle to the bore's outline in each section. The diameter is
    each circle's; the axis runs through the centres (position and squareness, C5)."""
    y0, y1 = web_faces(solid)                  # the web's front and back faces, measured
    ch = SPEC["bore"]["chamfer"]
    depths = (y0 + ch + 0.5, (y0 + y1) / 2, y1 - ch - 0.5)
    nominal = np.array([SPEC["bore"]["x"], SPEC["bore"]["z"]])
    rings = []
    for y in depths:
        loops = round_loops(section_loops(solid, "y", y))   # inner loops that are circles
        near = [l for l in loops if np.linalg.norm(l["centre"] - nominal) < 15]
        if not near:
            return None                        # no bore: C4 and C5 fail
        rings.append(min(near, key=lambda l: np.linalg.norm(l["centre"] - nominal)))
    shift = np.linalg.norm(rings[2]["centre"] - rings[0]["centre"])
    tilt = shift * (y1 - y0) / (depths[2] - depths[0])   # over the web's thickness
    return dict(d=[l["d"] for l in rings], centre=rings[1]["centre"], square=float(tilt),
                roundness=max(l["roundness"] for l in rings))

파일에서 읽는 것이 아니라 부품에서 측정

검증기는 피처 자체의 라벨을 절대 신뢰하지 않습니다. 모따기를 피한 3개의 깊이에서 솔리드를 보어에 직각으로 절단하고, 각 단면에서 보어 윤곽에 원을 맞춥니다. 지름은 모든 단면에서 18 µm 폭의 H7 공차 범위 안에 있어야 하며, 중심들을 지나는 축으로 위치와 직각도를 구합니다.

구멍과 슬롯도 같은 방식으로, 베이스의 양쪽 면 근처와 두께 중간에서 절단한 단면에서 측정하므로, 관통된 구멍만 구멍으로 인정됩니다. 피처 유형(C9)은 면 자체의 정의에서 읽는 유일한 검사 항목입니다.

태스크 폴더

제공되는 내용, 파일별로.

다운로드에는 기록된 실행과 이를 재현하는 데 필요한 스크립트를 포함해 아래에 나열된 각 파일이 들어 있습니다.

경로내용크기
task.tomlID, 분야, 접근 방식, 시간 제한, 데이터 분할, 컨테이너, 검증기 명령, 보상 규칙, 풀이 명령, 권리1.1 KB
instruction.md위의 개요818 B
environment/Dockerfile에이전트의 컨테이너: Python 3.12, OCP를 통한 OpenCascade, numpy, 도면. 실행 중에 외부에서 가져오는 것 없음1.0 KB
environment/project/drawing.svg참조 도면, rev A21.6 KB
tests/test.sh검증기를 실행합니다. 먼저 보상 0을 기록하므로, 비정상 종료나 시간 초과가 발생해도 0점입니다836 B
tests/verify.py게이트와 10개 검사 항목27.0 KB
tests/gold/bracket.step평가자 측에 있는 정답 솔리드91.3 KB
tests/probes/프로브: STEP 솔리드 8개, 빈 파일 하나, 주장만 있는 메모 하나, 그리고 각 제출물이 받아야 할 점수를 명시한 probes.json796.1 KB
tests/run_probes.py참조 풀이를 실행한 다음, 그 출력, 정답 솔리드, 모든 프로브에 대해 검증기를 실행하고 각 결과를 확인합니다5.1 KB
tests/run_results.json이 페이지에 표시된 실행36.9 KB
solution/solve.shsolve.py를 실행하고 output/bracket.step를 작성합니다398 B
solution/solve.py참조 풀이: 정답 솔리드를 읽지 않고, OCP를 사용해 도면의 치수로 브래킷을 만듭니다7.6 KB

태스크 폴더 다운로드 ZIP, 177.3 KB · 생성된 공개 샘플이며 평가 항목이 아닙니다

위의 실행은 Dockerfile이 빌드하는 컨테이너에서 네트워크를 끈 상태로 수행했습니다: 먼저 tests/가 없는 상태에서 참조 풀이를 실행한 다음, 검증기를 추가하여 실행했습니다.

귀사의 평가 하네스를 위한 이런 태스크가 필요하십니까?

학습하려는 역량과 평가 하네스가 받는 형식을 알려 주십시오. 저희가 태스크를 만드는 엔지니어링 & CAD 데이터와 환경 구축 방식도 살펴보십시오.

샘플 팩 요청